«
»

Bike Hydraulic Cider Press – Structural Design

hydraulic press

  • Crosstimbers – sandwich construction: 6×8 white pine with 5/4×6 red oak caps
  • Verticals – 6×8 white pine
  • Bed logs – 6×6 white pine
  • Tie rods – 1″-8, grade B7 threaded steel rod
  • Cylinder mount – 8×2.527″ A36 steel channel

Comments welcome.

This entry was posted on August 23, 2009 at 12:13 pm and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

One Response to “Bike Hydraulic Cider Press – Structural Design”

  1. Shalini Says:
    June 4, 2013 at 1:37 am | Reply

    Usually I have seen hydraulic presses made by metal. Here it looks like wooden body. Will it be used for pressing light materials?

Leave a reply to Shalini Cancel reply